Instructies voor XRGB3.0 & XENO3.0

 

XRGB3.0

XENO3.0

Activate saber

hold button for 2 seconds hold button for 2 seconds

Turn on the saber

1.Click button once 2.Twist the hilt quickly 3.Stabbing motion 4.Swing the saber 1.Click button once 2.Twist the hilt quickly 3.Stabbing motion 4.Swing the saber

Turn off the saber

1. Press the button for 1.5s (LED flashes three times) 2.Twist the hilt quickly 1. Press the button for 1.5s (LED flashes three times) 2.Twist the hilt quickly
3.Stab and then pull back 3.Stab and then pull back

While saber balade is off

Adjust volume Hold button 0.5 second/button led flash one time hold button 0.5 second/button led flash one time
Change light effect Hold button 1 second/button led flash two times 3 light effect in total Hold button 1 second/button led flash two times 8 light effect in total
Steady/Pulse/Unstable Steady/Pulse/Rainbow blade/Candy blade/Unstable/Crack blade/Fire blade/Flash blade
Change blade mode Hold button 1.5 seconds/button led flash three times 3 blade mode in total Hold button 1.5 seconds/button led flash three times 12 blade mode in total
Standard mode/Ghost mode/Blaster mode Standard blade/Velocity blade/Torch blade/Blaster blade/Ghost blade/Broken ignition/Stack ignition/Photon ignition/Warp ignition/Phaser ignition/Scavenger ignition/Hunter ignition
Change Fonts 16 fonts 16 fonts+34 fonts in SD card(including previous 16 fonts)
Change to last font: Hold button 3 seconds/button led flash six times Change to next font: Point down hilt and twist Change to last font: Hold button 2 seconds/button led flash four times Change to next font: Point down hilt and twist
Play music Point up hilt and twist Point up hilt and twist

While saber balade is on

Lock up Hold button and clash hilt Hold button and clash hilt
Drag Hold button 0.5 second/button led flash one time Hold button 0.5 second/button led flash one time
Infinite color change Hold button 1 second/button led flash two times Hold button 1 second/button led flash two times
Standard color change Point down hilt, hold button and twist(counterclockwise and then clockwise) Point down hilt, hold button and twist(counterclockwise and then clockwise)
Twist color change Point down hilt, hold button and twist (clockwise and then counterclockwise) Point down hilt, hold button and twist (clockwise and then counterclockwise)
Force effect Point up hilt, hold button and twist(clockwise and then counterclockwise) point up hilt, hold button and twist(clockwise and then counterclockwise)
Blaster/Blaster deflect Click button Click button
Turn off or turn on tap flash light and sound effects Hold button 2 second/button led flash four times /
Flash on clash Clash hilt Clash hilt
Stab Thrust the hilt forward Thrust the hilt forward
Spin Spin the hilt quickly Spin the hilt quickly
Melt Hold button, and stab hilt (twist to change melt color) Hold button, and stab hilt (twist to change melt color)
Lighting Block Hold button and pull hilt inwards Hold button and pull hilt inwards
Multi lock mode Hold button and swing saber. Same control to exit mode Hold button and swing saber. Same control to exit mode
Dueling mode Change to lock up mode first, Change to lock up mode first,
hold the button for 0.5s to dueling mode, then press 0.5s to end hold the button for 0.5s to dueling mode, then press 0.5s to end

Deep sleep/deactivate saber

1.Hold button 10 seconds 1.Hold button 10 seconds
2.Keep the saber without any operantion for 30min 2.Keep the saber without any operantion for 30min

PIXEL TO RGB/RGB TO PIXEL

/ Hold button 13 seconds when saber blade is off
Zondag, Maandag, Dinsdag, Woensdag, Donderdag, Vrijdag, Zaterdag
Januari, Februari, Maart, April, Mei, Juni, Juli, Augustus, September, Oktober, November, December
Niet genoeg artikelen beschikbaar. Er zijn maar [max] over.
Toevoegen aan verlanglijstBlader door verlanglijstVerlanglijst verwijderen
winkelwagen

Jouw winkelwagen is leeg.

terug naar winkel